Plan a trial for your application
Electrolytes in compound feed
Recalculate all sodium and chloride sources. Check uniformity in the finished blend.
Mineral premixing
Using the target carrier, evaluate salt segregation after vibration and behavior on discharge.
Purchase specifications and incoming inspection
Review these properties for the intended application grade. Example figures refer to the cited grade or source. Confirm the offered specification, packaging and lead time in the quotation. EU Catalogue of Feed Materials · Mineral feed material identities ↗
| Property | Unit | Published or agreed specification | Test conditions and checks |
|---|---|---|---|
| Sodium chloride assay | % by mass | Confirm for the proposed grade and project | Request assay on an as-received or dry basis. Specify the analytical method and purity conversion basis. |
| Chloride ion | % by mass | Confirm for the proposed grade and project | Request the measured Cl⁻ result and method. Calculate chloride from source water and other raw materials separately. |
| Particle size | µm / % sieve residue | Confirm for the proposed grade and project | Report sieve apertures and percentage passing. Make a composite sample from different bag positions and distinguish lumps from primary particles. |
When approving a sample, record the grade, methods, limits and specification revision. On receipt, match the packing lot number to the lot-specific COA and record the measured values and release decision.
From samples to commercial delivery
Packaging and receiving
Mark iodisation and anticaking status. Confirm powdered or granular salt, liner and seal.
Storage and handling
Check for moisture, adherence to container walls and caking. Sample separately at the start and end of unloading.
Sample and order lead times
State premix or pelleting trial size, replenishment quantity and receiving warehouse. Confirm MOQ, preparation time and plant arrival separately for samples, pallets and split orders.
Questions from the plant
Can iodised salt share a specification with ordinary salt?
Check the iodine source, inclusion and anticaking agents before assessing formulation suitability.
Can a chloride result establish all sodium present?
Conversion requires known composition and impurities. Determine sodium and chloride separately in mixed feed.
Report a delivery or batch issue
Include the order number, lot number from the package, label photos and inspection records for the affected lot. When retesting, check Sodium chloride assay, Chloride ion, Particle size.
Request documents for your application
TDS · Technical data sheet
For grade selection and sample approval, specify the grade and revision required.
SDS · Safety data sheet
Specify the country or region of use and the required language.
COA · Certificate of analysis
Request a sample COA during supplier review. For incoming inspection, provide the actual lot number.