Process applications
Comparing lysine hydrochloride and sulfate on cost per unit of available lysine
Use delivered cost per kilogram of active lysine.
Read article ↗
Procurement and selection insights
Materials, processes and procurement notes
Explore test methods, quality documents and purchasing decisions through practical technical questions.
Editor’s picks Process applications Humic acid content requires a stated method. Review water-soluble potassium and water-insoluble matter separately. A photograph of flocs after mixing cannot establish incoming material quality. Process applications Total organic matter does not directly measure fulvic acid. Interpret the assay alongside its method, mineral or other source and ash content. Process applications The name can refer to different salts and hydrates. Establish elemental molybdenum contribution, then check whether the target weighing is within the scale's reliable range. Process applications The grades deliver different molybdenum masses. For a low-dose element, one sampling location may falsely suggest underdosing when the real issue is distribution. Process applications Initial pH does not establish buffering capacity. Phosphoric acid also adds phosphorus to the nutrient balance. Process applications Product hydration and raw-water buffering can both change the endpoint reached at equal dose. Separate material and water effects. Process applications Total zinc, water-soluble zinc and commercial hydrate weight are different bases. A clear dilute solution does not establish stock compatibility. Process applications A percentage expressed as MnSO₄ cannot be read as elemental Mn. Changing to a chelate also changes the ligand and accompanying ions. Contact ENVO Share the product, application, quantity and destination to establish the next step.
Three decisions from the plant floor
Investigating flocs when potassium humate and calcium fertilizer are mixed
What to requalify when the source of potassium fulvate changes
Checking weighing accuracy for low-dose ammonium molybdate additions
Tracing low molybdenum in sodium molybdate stock to dosing or sampling
Why irrigation waters with the same pH require different phosphoric acid doses
Retesting stock solution titratable acidity after switching to citric acid monohydrate
Comparing zinc sulfate monohydrate and heptahydrate on water-soluble zinc cost
What to retest before switching from manganese sulfate to chelated manganese
Submit enquiry ↗Discuss your purchasing requirements